Grandstream Networks 496

HandyTone-496 User Manual Grandstream Networks, Inc.

Layer 2 QoS This setting includes two fields. The 802.1Q/VLAN Tag contains the value

used for layer 2 VLAN tag. Default setting is blank. And 802.1p priority value

contains the value of the priority value.

STUN Server STUN server’s IP or FQDN

Keep-alive interval This parameter specifies how often the HandyTone ATA sends a blank UDP

packet to the SIP server in order to keep the “hole” on the NAT open.

Use NAT IP: NAT IP address is used in SIP/SDP message. Default is blank.

Firmware Upgrade

and Provisioning Default method is HTTP. Firmware upgrade may take up to 10 minutes

depending on network environment. Do not interrupt the firmware upgrading

process.

Firmware Server

Path IP address or domain name of firmware server.

Config Server Path IP address or domain name of configuration server.

Firmware File

Prefix Default is blank. If configured, HandyTone-496 will request the firmware file

with the prefix. This setting is useful for ITSPs. End user should keep it blank.

Firmware File

Postfix Default is blank. End user should keep it blank.

Config File Prefix Default is blank. End user should keep it blank.

Config File Postfix Default is blank. End user should keep it blank.

Automatic Upgrade Default is “Yes”.

Firmware Key For firmware encryption. It should be 32 digit in Hexadecimal Representation.

End user should keep it blank.

Onhook Threshold The amount of time the hookflash is pressed that will cause the device to

onhook. Default is 800ms.

FXS Impedance Selects the impedance of the analog telephone connected to the Phone port.

Caller ID Scheme • Bellcore (North America)

• CID-Canada

• DTMF-Brazil

• DTMF-Sewden

• DTMF (Denmark)

• ETSI-DTMF (Finland, Sweden)

• ETSI-FSK (France, Germany, Norway, Taiwan, UK-CCA)

Onhook Voltage Select the onhook voltage to suit different area or PBX.