Grandstream Networks BudgeTone-100

BudgeTone-100 User Manual Grandstream Networks, Inc.

- 29 -

SIP Registration This parameter controls whether the BudgeTone phone needs to send

“Yes”.

Unregister on

Reboot Default is No. If set to yes, the SIP user will be unregistered on

reboot.

Expiration This parameter allows the user to specify the time frequency (in

minutes) the BudgeTone phone will refresh its registration with the

specified registrar. The default interval is 60 minutes (or 1 hour).

The maximum interval is 65535 minutes (about 45 days).

Early Dial Default is No. Use only if proxy supports 484 response

Dial Plan Prefix Sets the prefix added to each dialed number

No Key Entry

Timeout Default is 4 seconds.

Use # as

Dial Key This parameter allows the user to configure the “#” key to be used as

the “Send”(or “Dial”) key. Once set to “Yes”, pressing this key will

immediately trigger the sending of dialed string collected so far. In

this case, this key is essentially equivalent to the “(Re)Dial” key. If

set to “No”, this # key will then be included as part of the dial string

to be sent out.

Local SIP port This parameter defines the local SIP port the BudgeTone phone will

listen to and transmit on. The default value is 5060.

Local RTP port This parameter defines the local RTP-RTCP port pair the

BudgeTone phone will listen to and transmit on. It is the base RTP

port for channel 0. When configured, channel 0 will use this

port_value for RTP and the port_value+1 for its RTCP; channel 1

will use port_value+2 for RTP and port_value+3 for its RTCP. The

default value is 5004.

Use Random Port This parameter, when set to Yes, will force random generation of

oth the local SIP and RTP ports. This is usually necessary when

multiple BudgeTone phones are behind the same NAT.