Grandstream Networks, Inc. |
Via HTTP |
Server |
Automatic |
Upgrade |
DTMF Pay- |
load Type |
Syslog Server |
The URL for the HTTP server used for firmware upgrade and configuration via HTTP. For example, http://provisioning.mycompany.com:6688/Grandstream/1.0.0.33
Here “:6688” is the specific TCP port that the HTTP server is listening at, it can be omitted if using default port 80.
Note: If Auto Upgrade is set to No,
Default is No. Choose Yes to enable automatic HTTP upgrade and provisioning.
In “Check for upgrade every” field, enter the number of minutes to enable the phone to check the HTTP server for firmware upgrade or configuration changes in the de- fined period of time.
When set to No, the phone will only do HTTP upgrade and configuration check once at boot up. Used by ITSP. End user should NOT touch these parameters.
This parameter sets the payload type for DTMF using RFC2833. Default is 101.
The IP address or URL of System log server. This feature is especially useful for ITSP (Internet Telephone Service Provider)
- 33 -