HARDWARE SPECIFICATION
TABLE 4: HARDWARE SPECIFICATION OF GXW-410XV
LAN interface 2xRJ45 10/100Mbps
LED 8 LEDs (GREEN)
Universal Switching
Power Adaptor
Input: 100-240V AC, 50/60Hz, 0.5A Max
Output: 12V DC, 1.25A
UL certified
Dimension 225mm (L) x 172mm (W) x 42mm (H)
Weight 0.29 lbs (3.5 oz)
Temperature 32~104°F
0~40°C
Humidity 10% - 90% (non-condensing)
Compliance FCC, CE
CONFIGURATION WITH WEB BROWSER
The GXW-410xv has an embedded Web server that will respond to HTTP GET/POST requests. It also
has embedded HTML pages that allow a user to configure the IP phone through any common web
browser. Examples of GUI interfaces can be downloaded @
http://www.grandstream.com/GUI/GUI_GXW-410xv.
ACCESSING THE WEB CONFIGURATION MENU
1. Connect the Power to the GXW-410xv unit.
2. Connect an Ethernet cable between the LAN port on GXW-410xv to your PC.
3. You will have to assign a dummy IP with the same subnet as the GXW IP Address, which is
192.168.0.160 by default. So, set an IP address like 192.168.0.x for your PC.
4. Launch web browser and type http://192.168.0.160 at address of web browser. This connects you
to the GXW-410xv web server.
You may choose to use DHCP or PPPoE connection or another static IP address according to your local
network environment.
The Gateway Web Configuration Menu can be then accessed by the following URI: http://Gateway-IP-
Address where the Gateway-IP-Address is the IP address of the Gateway.
NOTE: To access the configuration page, type the GXW IP address into the browser, stripping out the
leading “0” because the browser will parse in octet. e.g. if the IP address is: 192.168.001.014, please
type in: 192.168.1.14.
Grandstream Networks, Inc. GXW-410xv User’s Manual Page 11 of 30
Firmware 1.0.0.36 Updated: 11/2006