Grandstream Networks GXW-410xv ADVANCED USER SETTINGS , Grandstream Device Configuration Password

TABLE 7: STATUS PAGE DEFINITIONS
Hardware Revision Hardware version number: Main Board, Interface Board
MAC Address The device ID in HEX format. This is a very important ID for ISP
troubleshooting.
IP Address This field shows LAN IP address of GXW-410xv
Product Model This field contains the product model info.
Software Version Program: This is the main software release. Boot and Loader are not changed
often.
System Up Time This field shows system up time since the last reboot.
Registered This field indicates whether the different Channels are registered to the SIP
server(s).
FXO Line Connected This field will give the status of each physical FXO Line connected to the
Gateway. It will update the status regularly.
Yes - Connected and Idle
Busy - Connected and Busy
No - Not connected
PPPoE Link Up This field shows whether the PPPoE connection is running if connected to DSL
modem.
Detected NAT Type This field shows what kind NAT the GXW-410xv is connected to via its LAN
port. It is based on STUN protocol.
ADVANCED USER SETTINGS
ADVANCED USER CONFIGURATION
The end-user needs to login to the advanced user configuration page the same way as for the basic
configuration page.
FIGURE 5: SCREENSHOT OF ADVANCED USER CONFIGURATION
Grandstream Device Configuration
Password
Login
All Rights Reserved Grandstream Networks, Inc. 2005-2006
Advanced User configuration includes the end user configuration and advanced configurations including:
SIP configuration, Codec selection, NAT Traversal Setting and other miscellaneous configuration.
Grandstream Networks, Inc. GXW-410xv User’s Manual Page 13 of 30
Firmware 1.0.0.36 Updated: 11/2006