Grandstream Networks HT-496 user manual Configuration Guide, Static IP Mode

Configuration Guide

CONFIGURING HT–496THROUGH VOICE PROMPT

DHCP MODE

Select voice menu option 01 to enable HT–496 to use DHCP.

STATIC IP MODE

Select voice menu option 01 to enable HT–496 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway and DNS server respectively.

FIRMWARE SERVER IP ADDRESS

Select voice menu option 13 to configure the IP address of the firmware server.

CONFIGURATION SERVER IP ADDRESS

Select voice menu option 14 to configure the IP address of the configuration server.

UPGRADE PROTOCOL

Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose between TFTP and HTTP.

FIRMWARE UPGRADE MODE

Select voice menu option 17 to choose firmware upgrade mode among the following three options:

1)always check, 2) check when pre/suffix changes, and 3) never upgrade

WAN PORT WEB ACCESS

Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.

CONFIGURING HT–496WITH WEB BROWSER

HT–496 has an embedded Web server that will respond to HTTP GET/POST requests. It also has embedded HTML pages that allow users to configure the HT–496 through a Web browser such as Microsoft’s IE and AOL’s Netscape.

ACCESS THE WEB CONFIGURATION MENU

The HT–496 HTML configuration menu can be accessed via LAN or WAN port:

FROM THE LAN PORT:

1.Directly connect a computer to the LAN port.

2.Open a command window on the computer

3.Type in “ipconfig /release”, the IP address etc. becomes 0.

4.Type in “ipconfig /renew”, the computer gets an IP address in 192.168.2.x segment by default

5.Open a web browser, type in the default gateway IP address. http://192.168.2.1. You will see the login page of the device.

Grandstream Networks, Inc.	HT–496 User Manual	Page 15 of 33
	Firmware 1.0.3.64	Last Updated: 1/2007

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030