Greenheck Fan 470998 Installation Instructions for Manual Quadrant Kit, Item Number, Description

Installation Instructions for Manual Quadrant Kit:

1)Place OPEN decal (item#7) over SHUT stamp and CLOSED decal (item #7) over OPEN stamp on the manual quadrant (item #5).

2)Attach manual quadrant (item #5) to swivel plate (item #2) using #10 x 1/2” HWH TEK screws (item #6).

3)Assemble loosely swivel brackets (item #1) onto the swivel plate (item #2) with nuts (item #3) and bolts (item #4) provided.

4)Line up centerline of hole in swivel plate (item #2) with the centerline of the damper shaft. Slide the assembly onto the damper shaft until the four mounting feet of swivel bracket (item #1) are in contact with the duct.

5)Attach swivel brackets (item #1) to duct using fasteners supplied by installer. Maintain center alignment and adjustment of swivel plate (item #2) so that the face of the bracket is perpendicular with the damper shaft.

6)Tighten nuts (item #3) and bolts (item # 4) to lock swivel bracket (item #1) to swivel plate (item #2).

7)Pace quadrant lever in open position and damper blades in full open position.

8)Tighten bolt on manual quadrant (item #5) to secure it to the damper shaft.

9)Adjust damper open/closed position to desired setting.

10)Tighten manual quadrant with wing nut.

Item Number	Description			Qty
1	Swivel Bracket		2
2	Swivel Plate		1
3	1/4-20	Spinlock Nut	4
4	1/4-20	Spinlock Bolt	4
5	1/2 in. dia. Manual Quadrant		1		damper shaft
6	#10 x 1/2 in. HWH TEK ZP		2
7	OPEN and CLOSE Decals		1

Copyright © 2007 Greenheck Fan Corporation 470998 Ext Pin & Man Quad Kit for VCDRM Rev. 1 September 2007