Extruded BACKDRAFT DAMPER
ADJUSTABLE COUNTERBALANCEEM-40 SERIES
Horizontal Mount - Vertical Airflow Down
Application and Design
The
Ratings (See page 2 for specific limitations) |
| |
Pressure: | 4.0 - 10.0 in. wg (996 Pa - 2491 Pa) | H* |
| differential pressure | |
|
| |
Velocity: | 2500 to 3500 fpm (13m/s - 18 m/s) |
|
Temperature: | 180°F (82ºC) |
|
Standard Construction
Frame: Heavy gauge 6063T5 extruded aluminum. (0.125 in.[3.2mm] thickness)
Blades: Heavy gauge 6063T5 extruded aluminum. (0.070 in. [1.8mm] thickness)
Axles: 3/4 in. (19mm) dia. metallic
Bearings: Synthetic (acetal) sleeve type Linkage: 1/8 in. (3mm) plated steel
Blade Seals: VinylEM-40
No Flange
Size Limitations
Minimum Size: 8 in. W x 11 in. H (203mm x 279mm)
Maximum Panel Size: 48 in. W x 74 in. H (1219mm x 1880mm)
Sizes larger than maximum shown will be supplied |
| |
as two or more equal size smaller dampers required | ||
Flange On | ||
to make up the size specified. These larger multiple | ||
Discharge | ||
damper assemblies require field assembly and may | ||
| ||
require additional reinforcement (not supplied by |
| |
Greenheck) to support the assembly. |
|
W*
*W & H dimensions furnished approximately 1/4 in. (6mm) under size.
|
| 3 in. |
3 | 1/8 in. | 11 1/8 in. |
|
| |
|
| 5 in. |
|
| Airflow |
11/2 in.
Options and Accessories
•11/2 in. flange on discharge:
• 11/2 in. flange on intake: |
•APC (Adjustable Pressure Controller). Allows field setting of relief pressure on all EM dampers. Use one per panel. Maximum recommended pressure set limitations are as follows:
Area ft2 | Maximum Set | ||
Pressure | |||
(m2) | |||
in. wg (Pa) | |||
|
| ||
|
|
| |
4 | (.37) | .75 (187) | |
|
|
| |
6 | (.56) | .50 (125) | |
|
| ||
8 (100) | .40 (100) | ||
|
| ||
10 (.93) | .30 (75) | ||
|
|
| |
15 | (1.39) | .20 (50) | |
|
|
| |
20 | (1.86) | .15 (37) | |
|
|
| |
24 | (2.23) | .125 (31) | |
|
|
|
11/2 in.
EM-42
Flange On
Intake
Counterbalance weights may require field adjustment. Instructions are available at www. greenheck.com.