Pioneer DEH-P7100BT Available accessories, XM tuner, Switching the XM display, stations, mode

Section

13 Available accessories

XM tuner			Switching the XM display
Listening to XM Satellite Radio			% Press DISP/SCRL to switch the XM dis-
You can use this unit to control an XM satellite			play.
			# You can scroll the text information to the left
digital tuner (GEX-P920XM), which is sold
			by pressing and holding DISP/SCRL.
separately.
For details concerning operation, refer to the
XM tuner’s operation manuals. This section			Storing and recalling broadcast
provides information on XM operations with			stations
this unit which differs from that described in			You can easily store up to six broadcast sta-
the XM tuner’s operation manual.
			tions for later recall.
! With this unit, you can operate two addi-
			! Six stations for each band can be stored in
tional functions: XM channel direct selec-
			memory.
tion and preset channel list.
1	2	3 4	1 Press	/LIST.
			Preset screen is displayed.
			2 Use MULTI-CONTROL to store the se-
			lected station in memory.
			Turn to change the preset number. Press and
			hold to store.
5			The XM preset number you have selected will
1 XM band indicator			flash and then remain lit. The selected station
			has been stored in memory.
2 XM channel number indicator
3 XM preset number indicator			3 Use MULTI-CONTROL to select the de-
4 XM channel select setting indicator
			sired station.
Shows what channel select setting has been
			Turn to change the station; press to select.
selected. CH is displayed when
			# You can also change the station by pushing
Channel number is selected, and CAT is dis-
			MULTI-CONTROL up or down.
played when Category is selected.
			# If you do not operate the list within about 30
5 XM text information
			seconds, the display is automatically returned to
Shows the text information of broadcast
			the ordinary display.
channel.
% Select an XM band.			Selecting the XM channel select
Press BAND/ESC/CANCEL.			mode
# Band can be selected from XM1, XM2 or
			You have two methods for selecting a channel:
XM3.
			by number and by category. When selecting
% Select a channel.			by number, channels in any category can be
Push MULTI-CONTROL left or right.			selected. Select by category to narrow your
# If you push and hold MULTI-CONTROL left or			search down to only channels in a particular
right, you can increase or decrease channel num-			category.
ber continuously.

#You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.)

56 En