Pioneer DEH-P7100BT Using voice recognition Using voice recognition to, Operate this unit

Section

09 Using voice recognition

Using voice recognition to		! If you are unsure of a voice command, say
operate this unit			Help or What can I say? to play the help
			voice guidance.
	Important	! Voice recognition is possible when any of the
			sources is selected, but a call can only be
In this section, voice recognition operation is illu-
			made when a cellular phone is connected.
strated in English. For about languages other			Refer to page 28, and check whether a cellular
than English, please refer to enclosed command
			phone is connected to this unit correctly. If a
list. Also, supported commands are shown in the
			voice command is said when no cellular
list.			phone is connected, an error occurs and the
You can use voice recognition to perform op-			unit waits for a voice command to be said.
			Connect a cellular phone and say a correct
erations such as the following.
			voice command.
! Input a phone number, and make a call.
		! For a list of voice commands, refer to the next
! Input a name stored in the phonebook and
			page.
	make a call.
		! When no voice command is spoken for 8 sec-
! Input a name and type stored in the phone-
			onds, a beep tone and Cancel is heard, and
	book, and make a call.
			voice recognition returns to the ordinary dis-
!	Access Help.
			play.
! Perform voice recognition again.
		! Operation varies depending on the type of cel-
1	Press VOICE/ to start voice recogni-		lular phone. Refer to the instruction manual
tion.			that came with your cellular phone for de-
The audio sound is muted, and a beep tone			tailed instructions.
sounds.
2 When you hear Voice Command,		Using voice recognition to
please. and a beep tone, say a voice com-		make a call
mand.
3 Perform the operation in accordance		You can use voice recognition to make a call.
		This explanation uses the example of making
with the voice guidance.
		a call to 0123456789.
	Notes	1	Start voice recognition.
! To cancel voice recognition partway through,		Refer to Using voice recognition on this page.
	say cancel or abort or press SRC/OFF,	2	Say Dial 0123456789.

BAND/ESC/CANCEL, or .

!When you want to return to the state immedi- ately after voice recognition was started, say Restart after you hear the beep tone to return to the state of Step 2.

!If a voice command is said incorrectly, an error occurs and the unit waits for a voice command to be said. Say a correct voice com- mand.

3Say Dial.

4A call is made to the number read out.

Notes

!A phone number of up to 30 digits long can be read out. If a phone number that exceeds 30 digits is input, an error occurs and the unit waits for a voice command to be said. Say a correct voice command.

40 En