Pioneer DEH-P7100BT Connecting to a Bluetooth device automatically, Editing device name

	Section
Using Bluetooth wireless technology	08

4Press MULTI-CONTROL to display the service select screen.

5Push MULTI-CONTROL up or down to select the service.

PHONE—AVRCP—A2DP

# “*” is displayed on the connected service.

# Profile that is not compatible with the con- nected device cannot be selected.

6Press MULTI-CONTROL to start or stop the selected service.

Connecting to a Bluetooth device automatically

It is possible to set the automatic connection between your Bluetooth device and this unit. If this function is set to on, connection between your Bluetooth device and this unit will take place automatically as soon as the two devices are less than a few meters apart.

!Initially, this function is set to on.

1 Display the connection menu.

Refer to Introduction to connection operations on page 28.

2Use MULTI-CONTROL to select Auto connect.

3Press MULTI-CONTROL to turn auto- matic connection on.

If your Bluetooth device is ready for Bluetooth wireless connection, connection to this unit is

automatically established.

# While using Bluetooth audio player in A2DP, it is not possible to connect the Bluetooth tele-

phone automatically.

# To turn automatic connection off, press MULTI-CONTROL again.

Displaying system version for repair

Should this unit fails to operate properly and you consult your dealer for repair, you may be asked to indicate the system versions of this

unit and of Bluetooth module. You can display the versions and confirm them.

1 Display the connection menu.

Refer to Introduction to connection operations on page 28.

2Use MULTI-CONTROL to select BT Version INFO.

The system (microprocessor) version of this unit is displayed.

3Push MULTI-CONTROL left to switch to the version of the Bluetooth module of this

unit.

# Pushing MULTI-CONTROL right returns to the system version of this unit.

Displaying BD (Bluetooth Device) address

This unit displays the BD address of this unit.

1 Display the connection menu.

Refer to Introduction to connection operations on page 28.

2Use MULTI-CONTROL to select Device INFO in the function menu.

3Push MULTI-CONTROL left to switch to the BD address.

12-digit hexadecimal string is displayed.

# Pushing MULTI-CONTROL right returns to the device name.

Editing device name

You can edit the device name.

The device name is set to PIONEER OEL BT as default.

1 Display the connection menu.

Refer to Introduction to connection operations on page 28.

2Use MULTI-CONTROL to select Edit device name.

English

En 31