Pioneer DEH-P7100BT 10Audio Adjustments, Recalling equalizer curves, Adjusting equalizer curves

Section

10Audio Adjustments

Recalling equalizer curves Adjusting equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves.

Display	Equalizer curve
Powerful	Powerful
Natural	Natural
Vocal	Vocal
Custom1	Custom 1
Custom2	Custom 2
Flat	Flat
SuperBass	Super bass

!Custom1 and Custom2 are adjusted equal- izer curves that you create. Adjustments can be made with a 7-band graphic equali- zer.

!When Flat is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.

1 Display the audio menu.

Refer to Introduction of audio adjustments on the previous page.

2Use MULTI-CONTROL to select the gra- phic equalizer adjustment.

Powerful appears in the display.

If the equalizer curve has been previously se- lected, the curve of that previously selected will be displayed instead of Powerful.

3Push MULTI-CONTROL left or right to select an equalizer curve.

Each time MULTI-CONTROL is pushed left or right, equalizer curves are selected in the fol- lowing order:

Powerful—Natural—Vocal—Custom1— Custom2—Flat—SuperBass

The factory supplied equalizer curves, with the exception of Flat, Custom1 and Custom2 can be adjusted to a fine degree (nuance control).

1Recall the equalizer curve you want to adjust.

Refer to Recalling equalizer curves on this page.

2Push MULTI-CONTROL up or down to adjust the equalizer curve.

Each time MULTI-CONTROL is pushed up or down, the equalizer curve increases or de- creases respectively.

+6 to –4 (or –6) is displayed as the equalizer curve is increased or decreased.

#The actual range of the adjustments are differ- ent depending on which equalizer curve is se- lected.

#The equalizer curve with all frequencies set to

0cannot be adjusted.

Adjusting 7-band graphic equalizer

For Custom1 and Custom2 equalizer curves, you can adjust the level of each band.

!A separate Custom1 curve can be created for each source. (The built-in CD player and the multi-CD player are set to the same equalizer adjustment setting automati- cally.) If you make adjustments when a curve other than Custom2 is selected, the equalizer curve settings will be memorized in Custom1.

!A Custom2 curve can be created common to all sources. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated.

1Recall the equalizer curve you want to adjust.

Refer to Recalling equalizer curves on this page.

44 En