Pioneer DEH-P7100BT operation manual Switching the warning tone, List TTS Text to speech Playback

Initial Settings

Setting the clock Switching the auxiliary setting

Section

11

English

Use these instructions to set the clock.

1Display the initial setting menu. Refer to Adjusting initial settings on the pre- vious page.

2Use MULTI-CONTROL to select Clock in the initial setting menu.

3Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display: Hour—Minute

As you select segments of the clock display,

the selected segment blinks.

# You can match the clock to a time signal by pressing MULTI-CONTROL.

!If 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)

!If 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)

4Push MULTI-CONTROL up or down to put a clock right.

Switching the warning tone

If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warning tone sounds. You can turn off the warning tone.

1Display the initial setting menu. Refer to Adjusting initial settings on the pre- vious page.

2Use MULTI-CONTROL to select Warning tone in the initial setting menu.

3Press MULTI-CONTROL to turn warning

tone on.

# To turn warning tone off, press MULTI-CONTROL again.

Auxiliary devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 53.

1Display the initial setting menu. Refer to Adjusting initial settings on the pre- vious page.

2Use MULTI-CONTROL to select AUX1/ AUX2.

3Press MULTI-CONTROL to turn AUX1/

AUX2 on.

# To turn AUX off, press MULTI-CONTROL again.

List TTS (Text to speech) Playback

TTS playback can be performed for an item se- lected with the cursor in a list. If this is set to on, any item the cursor is on for 2 seconds or longer is read out.

!This function is available for the name in the following lists:

—Phone book (phone book)

—Missed calls (missed call history)

—Dialed calls (dialed call history)

—Received calls (received call history)

1Display the initial setting menu. Refer to Adjusting initial settings on the pre- vious page.

2Use MULTI-CONTROL to select

List guidance.

3 Press MULTI-CONTROL to turn List guidance on.

#To turn this function off, press MULTI-CONTROL again.

En 49