Pioneer DEH-P7100BT Using subwoofer output, Adjusting loudness, Adjusting subwoofer settings

Audio Adjustments

2 Use MULTI-CONTROL to select 7-band	Using subwoofer output
graphic equalizer adjustment.	This unit is equipped with a subwoofer output
Frequency and the level (e.g., 50Hz +4) ap-
	which can be turned on or off.
pears in the display.
3 Push MULTI-CONTROL left or right to	1 Display the audio menu.
	Refer to Introduction of audio adjustments on
select the equalizer band to adjust.
	page 43.
Each time MULTI-CONTROL is pushed left or
right, equalizer bands are selected in the fol-	2 Use MULTI-CONTROL to select
lowing order:
	SubWoofer1.
50Hz—125Hz—315Hz—800Hz—2kHz—
5kHz—12.5kHz	3 Press MULTI-CONTROL to turn subwoo-
4 Push MULTI-CONTROL up or down to	fer output on.
	Normal appears in the display. Subwoofer out-
adjust the level of the equalizer band.
	put is now on.
Each time MULTI-CONTROL is pushed up or
	# To turn subwoofer output off, press
down, the level of the equalization band in-
	MULTI-CONTROL again.
creases or decreases.
+6 to –6 is displayed as the level is increased	4 Push MULTI-CONTROL left or right to
or decreased.	select the phase of subwoofer output.
# You can then select another band and adjust	Push MULTI-CONTROL left to select reverse
the level.	phase and Reverse appears in the display.
	Push MULTI-CONTROL right to select normal
	phase and Normal appears in the display.

Section

10

English

Adjusting loudness

Loudness compensates for deficiencies in the low- and high-sound ranges at low volume.

1 Display the audio menu.

Refer to Introduction of audio adjustments on page 43.

2Use MULTI-CONTROL to select Loudness in the audio function menu.

3Press MULTI-CONTROL to turn loudness

on.

Loudness level (e.g., Mid) appears in the dis-

play.

# To turn loudness off, press MULTI-CONTROL again.

4Push MULTI-CONTROL left or right to select a desired level.

Each time MULTI-CONTROL is pushed left or

right, level is selected in the following order: Low (low)—Mid (mid)—High (high)

Adjusting subwoofer settings

When the subwoofer output is on, you can ad- just the cut-off frequency and the output level of the subwoofer.

Only frequencies lower than those in the se- lected range are outputted from the subwoo- fer.

!When the subwoofer output is on, you can select SubWoofer2.

1 Display the audio menu.

Refer to Introduction of audio adjustments on page 43.

2Use MULTI-CONTROL to select SubWoofer2.

3Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the following order:

En 45