Pioneer DEH-P7100BT Using the Game Alert function, Switching the Game Alert on or off, English

	Section
Available accessories	13

%Press S.Rtrv/SAT MODE repeatedly to select the desired channel select setting. Channel number (channel number select set- ting)—Category (channel category select setting)

Note

You can also perform this operation in the menu that appears by using MULTI-CONTROL.

Selecting a channel in the channel category

1Select the channel select settings to Category.

Refer to Selecting the SIRIUS channel select mode on the previous page.

2Push MULTI-CONTROL up or down to select the desired channel category.

3Push MULTI-CONTROL left or right to select the desired channel in the selected channel category.

3Push MULTI-CONTROL left or right to select a desired league.

League names are switched in the display.

4Push MULTI-CONTROL up or down to select a desired team.

Teams in the selected category are switched in the display.

5Press MULTI-CONTROL to store the se- lected team in memory.

The game alert function will start on that

team.

# To turn the Game Alert off of the selected

team, press MULTI-CONTROL again.

# When you have already made 12 team selec- tions, FULL is displayed and additional team se- lection is not possible. In this case, first delete the team selection and then try again.

6Repeat these steps for selecting other teams.

Up to 12 teams can be selected.

Switching the Game Alert on or off

English

Using the Game Alert function

This system can alert you when games invol- ving your favorite teams are about to start. To use this function you need in advance to set up a game alert for the teams.

!To use this function, Pioneer SIRIUS bus in- terface (e.g. CD-SB10) is required.

!To use this function, SIRIUS plug-and-play unit with Game Alert Function is required.

!For details, refer to SIRIUS plug-and-play unit’s manuals.

!You can also operate this function when SIR-PNR2 is connected to this unit.

Selecting teams for Game Alert

Once you made team selections, you need to turn the Game Alert function on.

!The Game Alert function is on at the default setting.

1Display the function selection menu. Refer to Introduction of advanced operations on the previous page.

2Use MULTI-CONTROL to select

Game alert in the function menu.

3Press MULTI-CONTROL to turn the Game Alert on.

The Game Alert function is now on.

# To turn the Game Alert function off, press MULTI-CONTROL again.

1Display the function selection menu. Refer to Introduction of advanced operations on the previous page.

2Use MULTI-CONTROL to select

Team setting in the function menu.

En 59