Section
08Using Bluetooth wireless technology
#Push
6Press
While connecting, Pairing flashes. If the con-
nection is established, Paired is displayed.
# If the connection fails, ERROR is displayed. In
this case, try again from the beginning.
# PIN code is set to 0000 as the default. You can change this code in the initial setting. Refer to Entering PIN code for Bluetooth wireless con- nection on page 32.
Disconnecting a Bluetooth device
This function can be operated only when the Bluetooth wireless connection is being estab- lished.
1 Display the connection menu.
Refer to Introduction to connection operations on page 28.
2Use
3Push
select a device.
# If only one device was found, this step cannot be performed.
4Press
While disconnecting, Disconnecting flashes. If the Bluetooth wireless connection is termi-
nated, Disconnected is displayed.
# If multiple Bluetooth devices have been con- nected and you wish to disconnect them, press
Deleting a paired Bluetooth device
1 Display the connection menu.
Refer to Introduction to connection operations
on page 28.
2Use
3Push
select a device.
# If only one device was found, this step cannot
be performed.
# Push
address.
# If device name cannot be obtained, BD ad- dress is displayed.
4When the device name is being dis- played, push
Deleting device is now on standby.
# If you do not want to delete the device, push
5Press
While deleting, Deleting flashes. After the de- vice is deleted, Deleted is displayed.
Connecting a paired Bluetooth device and selecting a service
Bluetooth service of the paired device can be selected. You can choose a Bluetooth service from PHONE service, AVRCP service or A2DP service.
1 Display the connection menu.
Refer to Introduction to connection operations on page 28.
2Use
3Push
select a device.
# If only one device was found, this step cannot
be performed.
# Push
the BD address and device name.
# If device name cannot be obtained, BD ad- dress is displayed.
30 En