Pioneer DEH-P7100BT Setting automatic answering, Transferring entries to the phone book

Section

08Using Bluetooth wireless technology

Notes

!To return to the playback display, press

BAND/ESC/CANCEL.

!If you do not operate functions other than

PH B Transfer, and Number dial within about 30 seconds, the display automatically returns to the ordinary display.

!You can operate SCO Private Mode only while talking on the phone.

!If Bluetooth telephone is not connected to this unit, Number dial cannot be operated.

Setting automatic answering

1 Display the function menu.

Refer to Introduction to advanced operations on the previous page.

2Use MULTI-CONTROL to select Auto answer.

3Press MULTI-CONTROL to turn auto-

matic answering on.

# To turn automatic answering function off, press MULTI-CONTROL again.

Transferring entries to the phone book

Phone books in your cellular phone can be transferred to this unit by using your cellular phone.

!1 000 entries for each user (max. 5 devices) can be stored in the phone book. Each in- dependent entry can hold five phone num- bers and genres.

1 Display the function menu.

Refer to Introduction to advanced operations on the previous page.

2Use MULTI-CONTROL to select PH B Transfer.

3Press MULTI-CONTROL to enter the phone book transfer standby mode.

4Use the cellular phone to perform phone book transfer.

Perform phone book transfer using the cellu- lar phone. For detailed instructions, refer to the instruction manual that came with your cellular phone.

When phone book transfer is completed,

Data transferred is displayed.

# The display indicates how many entries have been transferred and the total number to be transferred.

Adjusting the intended party’s listening volume

To maintain the good speech quality, this unit can adjust the intended party’s listening vo- lume. If the volume is not enough for intended party, adjust this function.

1 Display the function menu.

Refer to Introduction to advanced operations on the previous page.

2Use MULTI-CONTROL to select Far end Volume.

3Push MULTI-CONTROL left or right to select the desired setting.

1—2—3—4—5

#This function can be performed even while talking on the phone.

#Settings can be stored for each device.

Switching the ring tone

You can select whether to use this unit’s ring tone or not. If this function is set to on, ring tone from this unit will sound.

1 Display the function menu.

Refer to Introduction to advanced operations on the previous page.

2Use MULTI-CONTROL to select Ring tone.

38 En