Pioneer DEH-P7100BT 11Initial Settings, Adjusting initial settings, Selecting the language

Section

11Initial Settings

Adjusting initial settings Selecting the language

1

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

1Function display

! Shows the function status.

1Press SRC/OFF and hold until the unit turns off.

2Press MULTI-CONTROL and hold until the initial setting menu appears in the dis- play.

3Turn MULTI-CONTROL to select one of the initial settings.

Turn MULTI-CONTROL to switch between the functions in the following order.

Language select (language selection)— Calendar (calendar)—Clock (clock)— Warning tone (warning tone)—AUX1 (auxili- ary input 1)—AUX2 (auxiliary input 2)— List guidance (voice guidance setting)— Dimmer (dimmer)—Brightness (brightness)

—S/W control (rear output and subwoofer controller)—Demonstration (feature demo)— Reverse mode (reverse mode)—Ever-scroll (ever scroll)—BT AUDIO (BT audio setting)— BT Memory clear (clearing Bluetooth mem- ory)—Software update (software update) Use the following instructions to operate each

particular setting.

# To cancel initial settings, press

BAND/ESC/CANCEL.

For your convenience, this unit equips multi- ple language guidance. You can select the lan- guage best suited to your first language.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select Language select in the initial setting menu.

3Push MULTI-CONTROL left or right to select the language. English—Français—Español

4Press MULTI-CONTROL to determine

the selection.

# Display guidance and voice guidance are set to the same language simultaneously.

Setting the date

The calendar display adjusted in this mode ap- pears when the telephone source is selected or sources and the feature demo are off.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select Calendar in the initial setting menu.

Calendar appears in the display.

3Push MULTI-CONTROL left or right to select the segment of the calendar display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the calendar display: Day—Month—Year

As you select segments of the calendar dis- play the segment selected will blink.

4Push MULTI-CONTROL up or down to set the date.

Pushing MULTI-CONTROL up will increase the selected day, month or year. Pushing

MULTI-CONTROL down will decrease the se- lected day, month or year.

48 En