Pioneer DEH-P7100BT operation manual Using the equalizer

Audio Adjustments

Introduction of audio	Using balance adjustment
adjustments	You can change the fader/balance setting so
	that it can provide the ideal listening environ-
	ment in all occupied seats.
	1 Display the audio menu.
	Refer to Introduction of audio adjustments on
	this page.
1
1 Audio display	2 Use MULTI-CONTROL to select Fader in
Shows the audio adjustment status.	the audio function menu.
	# If the balance setting has been previously ad-

Section

10

English

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to se- lect.

The audio menu is displayed.

3Turn MULTI-CONTROL to select the audio function.

Turn MULTI-CONTROL to switch between the audio functions in the following order.

Fader (balance adjustment)—Powerful (gra- phic equalizer adjustment)—50Hz (7-band graphic equalizer adjustment)—Loudness (loudness)—SubWoofer1 (subwoofer on/off setting)—SubWoofer2 (subwoofer setting)— Bass (bass boost)—HPF (high pass filter)— SLA (source level adjustment)—Guide VOL

(voice guidance volume adjustment)

# You can select the SubWoofer2 only when

subwoofer output is turned on in SubWoofer1.

# When selecting FM as the source, you cannot

switch to SLA.

# If TEL is selected as a source, only Fader (bal-

justed, Balance will be displayed.

3Push MULTI-CONTROL up or down to adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance moves towards the front or rear.

Front 15 to Rear 15 is displayed as the front/

rear speaker balance moves from front to rear.

# F/R 0 is the proper setting when only two

speakers are used.

# When the rear output setting is Rear SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer out- put on page 50.

4Push MULTI-CONTROL left or right to adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed left or right, the left/right speaker balance moves to- wards the left or right.

Left 15 to Rear 15 is displayed as the left/right speaker balance moves from left to right.

ance adjustment) and Guide VOL (guidance vo- lume) can be operated.

#To return to the display of each source, press

BAND/ESC/CANCEL.

#If you do not operate functions except for

50Hz within about 30 seconds, the display is automatically returned to the ordinary display.

Using the equalizer

The equalizer lets you adjust the equalization to match the car’s interior acoustic character- istics as desired.

En 43