Pioneer DEH-P7100BT Boosting the bass, Using the high pass filter, Adjusting source levels

Section

10Audio Adjustments

50Hz—63Hz—80Hz—100Hz—125Hz

4Push MULTI-CONTROL up or down to adjust the output level of the subwoofer. Each time MULTI-CONTROL is pushed up or down, subwoofer level increases or decreases.

+6 to -24 is displayed as the level is increased or decreased.

#To turn high pass filter off, press MULTI-CONTROL again.

4Push MULTI-CONTROL left or right to select cut-off frequency.

Each time MULTI-CONTROL is pushed left or right, cut-off frequencies are selected in the

following order:

50Hz—63Hz—80Hz—100Hz—125Hz

Boosting the bass

Bass boost function boosts the bass level of sound.

1 Display the audio menu.

Refer to Introduction of audio adjustments on page 43.

2Use MULTI-CONTROL to select Bass.

3Push MULTI-CONTROL up or down to select a desired level.

0to +6 is displayed as the level is increased or decreased.

Using the high pass filter

When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers.

1 Display the audio menu.

Refer to Introduction of audio adjustments on page 43.

2Use MULTI-CONTROL to select HPF.

3Press MULTI-CONTROL to turn high pass filter on.

80Hz appears in the display. High pass filter is

now on.

# If the high pass filter has been previously ad- justed, the frequency of that previously selected will be displayed instead of 80Hz.

Adjusting source levels

Source level adjustment (SLA) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.

!Settings are based on the FM volume level, which remains unchanged.

1Compare the FM volume level with the level of the source you wish to adjust.

2Display the audio menu.

Refer to Introduction of audio adjustments on page 43.

3Use MULTI-CONTROL to select SLA in the audio function menu.

4Push MULTI-CONTROL up or down to adjust the source volume.

SLA +4 to SLA –4 is displayed as the source volume is increased or decreased.

Notes

!The AM volume level can also be adjusted with source level adjustments.

!The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically.

!External unit 1 and external unit 2 are set to

the same source level adjustment volume automatically.

46 En