Section
13Available accessories
Note
To return to the playback display, press
BAND/ESC/CANCEL.
Switching the seek mode
There are two method of seek tuning settings, one is Seek HD (Digital broadcasting stations seek) and the other is Seek ALL (normal seek).
1Use
Refer to Introduction to advanced operations on the previous page.
2Press
Seek
Switching the reception mode
If a digital broadcast reception condition gets poor, this unit automatically switches to the analog broadcast of the same frequency level. If this function is set to on, the tuner switches between digital broadcast and analog broad- cast automatically. If this function is off, recep- tion will be conducted within an analog broadcast.
1Use
Refer to Introduction to advanced operations on the previous page.
2Press
vorite setting.
1
3 2
1Song number indicator
2Play time indicator
3Song time (progress bar)
%Fast forward or reverse
Push and hold
%Select a track
Push
Notes
!Read the precautions for iPod in the following section. Refer to page 75.
!While iPod is connected to this unit, PIONEER (or (check mark)) is displayed on the iPod.
!If an error message is displayed, refer to Error messages on page 70.
!When the ignition switch is set to ACC or ON, the iPod’s battery is charged while the iPod is connected to this unit.
!While the iPod is connected to this unit, the iPod cannot be turned on or off.
!Before connecting the dock connector of this unit to the iPod, disconnect the headphones from the iPod.
!The iPod is turned off about two minutes after the ignition switch is set to OFF.
Displaying text information on iPod
Playing songs on iPod
Basic operation
You can use this unit to control an interface adapter for iPod (e.g.
%Press DISP/SCRL to select the desired text information.
Play
album name and : song
62 En