Greenheck Fan No Flow Duct Smoke Detector Wiring Diagrams, Sleeve Length, Ordering Options

Sleeve Length

Height less than 11 in. (279mm): 21 in. (533mm) sleeve with 12 in. (305mm) “A” dimension

Height equal to or greater than 11 in. (279mm): 16 in. (406mm) sleeve with 9.5 in. (241mm) “A” dimension

Ordering Options

Factory Mounted

Smoke detector will be wired to a 4 x 4 handi-box. The closure device (if RRL or TOR) will also be wired to the handi-box. Dampers provided with the smoke detector option will include single point wiring as standard (includes RRL, OCI, TOR, and detectors).

Shipped Loose

Shipped loose smoke detector will only include the detector itself (no mounting hardware or bracket seals). Note: Dampers ordered with shipped loose smoke detectors will have the standard sleeve length, not a longer sleeve to accommodate the smoke detector installation. If smoke detectors are intended to be field mounted on the damper sleeve, the damper sleeve length and ‘A’ dimension will need to be manually changed to the requirements indicated under ‘Sleeve Length’.

Wiring Diagrams

RRL

RRL

L1

L2

SWITCH #2

SWITCH #1

L1

L2

ORANGE	BLACK		RED
			9
			8	10 11
		RED	BLACK
			6	12
			7	13
			BLACK	14
WHITE	BLACK
		BLUE		BLUE

MOTOR

		OCI		OCI
YELLOW YELLOW YELLOW YELLOW
			RED
			9
			8	10 11
		RED	BLACK
			6	12
			7	13
			BLACK	14
WHITE	BLACK
		BLUE		BLUE

MOTOR