Step 5
Locate the left top shelf. Position it on the 4 supports on the left side
panels – 2 on the exterior and 2 on the interior panels. From below line up the holes in the supports with those of the top shelf, insert and tighten the 4 wing nuts and lock washers.
Rear View |
Step 6
Locate the central panel. Insert the 2 dowels on the cental panel into the dowel holes on the left side panel (interior) which are at the same level as the left lower panel.
Step 7
Locate the right side panel (interior) and position it on the right side (interior) of the base. Insert the 2 dowels located on the right side of the left lower panel into the dowel holes on the right side panel (interior). Line up the holes on the right side panel (interior) and the base, insert and tighten the 2 wing nuts and lock washers.
Step 8
Locate the central top shelf (with hinges) and set it on top of the left and right interior panels. From the top, line up the 4 holes (2 on each side), insert and tighten 4 wing nuts and lock washers.
Rear View |
3
