Greenway Home Products GWD2630W-1 Specifications, Troubleshooting Tips, Problem, Possible Cause

SPECIFICATIONS

GWD2630W-1

Output per hr:	Hot	1.3 gal / 5.0 L
	Cool	0.1 gal / 0.4 L
Internal Tank Capacity:	Hot	0.16 gal / 0.6 L
	Cool	0.2 gal / 0.8 L
Heating Temp (approx.):		201°F / 91°C
Cooling Temp (approx.):		42.8°F - 46.4°F / 6°C - 8°C
Power Consumption (Watts):	Hot	1200 W
	Cool	65 W
Power Consumption (Amps):	Hot	10.5 A
	Cool	1 A
Voltage		120 V

WARNING: The Water Dispenser heats and dispenses water to 201˚ F / 91˚ C which can cause severe burns or scalding.

DO NOT ALLOW CHILDREN TO USE THE HOT WATER DISPENSING BUTTON WITHOUT PROPER AND DIRECT SUPERVISION.

Child Resistant

Safety Switch

TROUBLESHOOTING TIPS

Problem	Possible Cause	Suggested Solution
Water dispenser	Small pin hole or crack in the bottle, (common with	Conduct water bottle leak test outlined
is leaking	recycled water bottles).	on page 4.
	Drain caps are not secure.	Ensure drain caps are secure.
	Water was poured directly into bottle support collar	Drain by pressing dispenser buttons.
	and overflowed.
	Possible air pocket.	Press several times to relieve air pocket and release
		to re-set valve.

Water is not hot All the water in the tank has been used. or cold enough

The unit is unplugged.

EZ-heat*Feature was not activated.

The circuit breaker in your home is tripped or the fuse has blown.

Replace with full bottle and wait; 60 minutes for water to cool, 3 minutes for water to heat (after activating EZ-heat*feature button).

Plug it into the outlet.

Activate EZ-heat*Feature by pressing the button.

Reset the breaker or replace the fuse.

Water dispenser Empty water bottle.	Replace with full bottle and wait; 60 minutes for water
is not dispensing	to cool, 3 minutes for water to heat (after activating
water	EZ-heat*feature button).
Mineral deposits clogging tanks.	See Cleaning the Inside of the Dispenser.
Possible air pocket.	Push down on the dispenser buttons to prime the
	unit.
Water dispenser Bottle making a gurgling noise as it fills the tank.	This is normal.
is noisy
Water dispenser is uneven.	Make sure the dispenser is on an even surface that
	can support its full weight.

Attention: Do not return this product to the store. For questions on operation, assembly or parts, please contact us at www.greenwayhp.com or 1-866-253-0447.

8