SPECIFICATIONS
VWD2636-1
Output per hr: | Hot | 1.3 gal / 5.0 L |
| Cool | 0.1 gal / 0.4 L |
|
|
|
Internal Tank Capacity: | Hot | 0.16 gal / 0.6 L |
| Cool | 0.2 gal / 0.8 L |
|
|
|
Heating Temp (approx.): |
| 201°F / 91°C |
|
|
|
Cooling Temp (approx.): |
| 42.8°F - 46.4°F / 6°C - 8°C |
|
|
|
Power Consumption (Watts): | Hot | 1200 W |
| Cool | 65 W |
|
|
|
Power Consumption (Amps): | Hot | 10.5 A |
| Cool | 1 A |
|
|
|
Voltage |
| 120 V |
|
|
|
WARNING: The Water Dispenser heats and dispenses water to 201˚ F / 91˚ C which can cause severe burns or scalding.
DO NOT ALLOW CHILDREN TO USE THE HOT WATER DISPENSING BUTTON WITHOUT PROPER AND DIRECT SUPERVISION.
Child Resistant
Safety Switch
TROUBLESHOOTING TIPS
Problem | Possible Cause | Suggested Solution |
Water dispenser | Small pin hole or crack in the bottle, (common with | Conduct water bottle leak test outlined |
is leaking | recycled water bottles). | on page 4. |
| Drain caps are not secure. | Ensure drain caps are secure. |
| Water was poured directly into bottle support collar | Drain by pressing dispenser buttons. |
| and overflowed. |
|
| Possible air pocket. | Press several times to relieve air pocket and release |
|
| to |
Water is not hot All the water in the tank has been used. or cold enough
The unit is unplugged.
The circuit breaker in your home is tripped or the fuse has blown.
Replace with full bottle and wait; 60 minutes for water to cool, 3 minutes for water to heat (after activating
Plug it into the outlet.
Activate
Reset the breaker or replace the fuse.
Water dispenser Empty water bottle. | Replace with full bottle and wait; 60 minutes for water |
is not dispensing | to cool, 3 minutes for water to heat (after activating |
water | |
Mineral deposits clogging tanks. | See Cleaning the Inside of the Dispenser. |
Possible air pocket. | Push down on the dispenser buttons to prime the |
| unit. |
|
|
Water dispenser Bottle making a gurgling noise as it fills the tank. | This is normal. |
is noisy |
|
Water dispenser is uneven. | Make sure the dispenser is on an even surface that |
| can support its full weight. |
Attention: Do not return this product to the store. For questions on operation, assembly or parts, please contact us at www.greenwayhp.com or
8