OPERATOR’S SAFETY PRECAUTIONS

IMPORTANT: Failure to comply with the following safety precautions may result in severe personal injury or damage to the machine.

1.Read and understand the operating instructions in this manual thoroughly. Only allow properly trained persons to operate this machine.

2.Note all warning labels on the freezer. If any warning labels are missing or damaged replace them immediately.

3.Do not wear loose fitting garments or jewelry which could cause a serious accident.

4.Stay alert at all times during operation.

5.Keep operating area clean.

6.Do not attempt any repairs unless the main power supply to the freezer has been disconnected. Contact Grindmaster Technical Service for service assistance.

7.Do not put objects or fingers in the dispense plunger.

8.Do not operate freezer if any excessive noise or vibration occurs. Contact your authorized service agent.

9.Be certain machine is installed with adequate space for proper air circulation. (See installation section.) Failure to provide sufficient ventilation will reduce freezer performance and void equipment warranty.

Located on the right, left and rear panels. (part # W0600218)

FREEZER APPLICATION AND SPECIFICATIONS

Remote Freezers

The freezer consists of a freezing cylinder with a rotating internal auger (dasher) that is belt-driven by an electric motor. The auger scrapes frozen product off of the inside of the refrigerated cylinder.

Crathco remote beverage freezers are designed to operate in conjunction with a remote condensing unit or be connected to a central refrigeration system. It is recommended that the condensing unit have no more than 2 1/2 hp per barrel to ensure maximum efficiency. The refrigerant must be R404A (Dupont®HP62®). The refrigeration for each barrel is controlled by the liquid feed solenoid. The liquid feed solenoid is opened and closed by the limit switch attached to the drive motor. (When the product consistency reaches the desired point, the switch closes and de-energizes the liquid feed solenoid 20 seconds later.) Twin units operate with each barrel independently. Quick connect refrigeration connections are supplied with each unit. Each freezer is factory supplied with 5/8" suction and 3/8" liquid connections. The piping connecting the freezer with the remote condensing unit or central system should be sized according to industry standards. The installer is responsible for sizing the refrigeration lines to the unit. When properly operated and cared for, the remote freezers will provide many years of service. Proper care includes regular cleaning and maintenance. To minimize the amount of maintenance necessary, follow the operating proce- dures outlined in this manual.

There are four variations of the remote unit: 3341 – standard single barrel remote unit 3342 – standard twin barrel remote unit

3341A – single barrel remote unit with internal autofill system 3352 – dual barrel remote unit with internal autofill system

Page 2

Crathco® Remote Beverage Freezers

Page 4
Image 4
Grindmaster 3352, 3341A, 3342 manual OPERATOR’S Safety Precautions, Freezer Application and Specifications, Remote Freezers

3341, 3341A, 3352, 3342 specifications

Grindmaster has established a reputable name in the coffee and foodservice equipment industry, and the models 3342, 3352, 3341A, and 3341 are emblematic of their innovative approach and high-quality standards. These advanced grinders are designed to cater to the diverse needs of cafés, restaurants, and any establishment that prioritizes quality coffee preparation.

The Grindmaster 3342 model boasts a number of key features that set it apart. It has a durable construction that ensures longevity, making it ideal for busy environments. The 3342's grinding capacity is optimized for medium to high-volume settings, with a patented grinding system that consistently delivers a uniform grind. This is critical for achieving the best flavor extraction during brewing, as an even grind size increases the coffee's overall taste profile.

Similarly, the 3352 model enhances user experience with its intuitive interface, allowing operators to easily adjust grind settings to meet different coffee blends and brewing techniques. Its advanced digital controls provide precise adjustments, enabling baristas to fine-tune the grind size for espresso, drip coffee, or even French press, contributing to a versatile coffee menu.

The Grindmaster 3341A stands out with its advanced technology that enhances efficiency. This model features a high-torque motor designed to reduce heat transfer during grinding, which preserves the coffee's essential oils and aroma. Moreover, its silent operation technology minimizes noise, making it a perfect fit for modern cafés where ambiance is essential.

The Grindmaster 3341 is also noteworthy for its ease of maintenance. It comes equipped with removable grinding burrs that simplify the cleaning process, ensuring that coffee quality is maintained over time. With its sturdy build and efficient performance, this model can handle heavy use while delivering exceptional results.

In summary, the Grindmaster 3342, 3352, 3341A, and 3341 are powerful grinders engineered for performance, versatility, and ease of use. Their advanced characteristics, such as consistent grinding, digital controls, high-torque motors, and easy maintenance, make them indispensable tools for any coffee professional. With Grindmaster's commitment to quality, these models provide an excellent foundation for crafting perfect coffee, allowing businesses to thrive in an increasingly competitive market.