SECTION 4: OPERATIONS
Operation Safety
Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety
Power Controls
It is vital that you become familiar with the power controls before operating the Model G0463. Three separate switches control the power on the mill/drill (see Figure 10).
glasses, a respirator, and hearing protection when operating this machine.
1
2
3
4 
5
6
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving machinery.
NOTICE
If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
7
Figure 10. Control panel components.
1.EMERGENCY STOP Button: Immediately disconnects power to the system. Once pressed, this button must be twisted until it pops out to return power to the switches. The FAULT INDICATOR Light will turn on and the MAIN POWER Switch needs to be turned OFF.
2.FAULT INDICATOR Light: Indicates a cir- cuit interruption due to a switch being out of proper position. Turn all switches OFF when lit.
3.POWER INDICATOR Light: Shines when the system power is ON.
4.Fuse Socket: Houses a 10 Amp system fuse.
G0463 Small Mill/Drill |
