Storage
When storing your air compressor, fol- low these guidelines:
1.Turn the compressor switch lever to OFF.
2.Unplug the compressor.
3.Turn the regulator counterclockwise to set the line pressure to zero.
4.Run the air tool to relieve the air pres- sure in the hose, then remove the air hose and the tool.
5.Drain water from the tank as instructed in Draining Tank on Page 16. Leave the valve open until the next usage.
Note: Draining the air from the tank can be extremely loud. Wear ear pro- tection when draining the tank.
6.Store the air compressor in its normal operating position in a cool protected area.
Failure to unplug the air compres- sor before storage may result in the compressor running continuously, causing overheating, damage to the compressor, and possibly a fire.
Water will condense in the air com- pressor tank. Water left in the tank can cause the tank to weaken and corrode, increasing the risk of tank rupture.
Always disconnect the air hose from tools whenever not in use or while servicing! During maintenance, a tool connected to air may operate accidentally, causing serious per- sonal injury!
Model G0464/G0465/G0467/G0468/G0470 Air Compressors |
