7.KEEP CHILDREN AND VISITORS AWAY. Keep all children and visitors a safe distance from the work area.
8.MAKE WORKSHOP CHILD PROOF. Use padlocks, master switches, and remove start switch keys. Shut off air supply before leaving shop.
9.NEVER LEAVE UNATTENDED TOOL CONNECTED TO AIR. DO NOT leave before relieving the tool of air pressure and disconnecting it from the air hose.
10.DO NOT USE IN DANGEROUS ENVIRONMENTS. DO NOT use in damp, wet locations, or where flam- mable or noxious fumes may exist.
11.KEEP WORK AREA CLEAN AND WELL LIT. Clutter and dark shad- ows may cause accidents.
12.USE A GROUNDED EXTENSION CORD RATED FOR THE MACHINE AMPERAGE. Undersized cords overheat and lose power. Replace extension cords if they become dam- aged. DO NOT use extension cords for 220V machinery.
13.ONLY ALLOW TRAINED AND PROPERLY SUPERVISED PER- SONNEL TO OPERATE MACHIN- ERY. Make sure operation instruc- tions are safe and understood.
14.MAKE SURE GUARDS ARE IN PLACE AND WORK CORRECTLY BEFORE USING MACHINERY.
15.CHECK FOR DAMAGED PARTS BEFORE USING MACHINERY. Check for binding and alignment of parts, broken parts, part mounting, loose bolts, and any other conditions that may affect machine operation. Repair or replace damaged parts.
16.REMOVE ADJUSTING KEYS AND WRENCHES. Make a habit of check- ing for keys and adjusting wrenches before turning machinery ON.
17. REDUCE THE RISK OF UNINTENTIONAL FIRING. DO NOT carry tool with hand on trigger and disconnect from air when not in use.
18.USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching.
19.DO NOT FORCE MACHINERY. Work at the speed for which the machine or accessory was designed.
20.DO NOT OVERREACH. Keep prop- er footing and balance at all times.
21.SECURE WORKPIECE. Use clamps or a vise to hold the workpiece when practical. A secured workpiece pro- tects your hands and frees both hands to operate the tool.
22.USE SUGGESTED ACCESSORIES. Refer to the instruction manual for recommended accessories. The use of improper accessories may cause risk of injury.
23.MAINTAIN MACHINERY WITH CARE. Keep tools lubricated and clean for best and safest perfor- mance. Follow instructions for lubri- cating and changing accessories.
24.ALWAYS DISCONNECT FROM POWER SOURCE BEFORE SERVICING MACHINERY. Make sure switch is in OFF position before reconnecting.
25.DISCONNECT PNEUMATIC TOOLS FROM COMPRESSOR. Always dis- connect tools before servicing or changing accessories.
26.BE AWARE THAT CERTAIN WOODS MAY CAUSE ALLERGIC REACTIONS IN PEOPLE AND ANIMALS, ESPECIALLY WHEN EXPOSED TO FINE DUST. Make sure you know what type of wood dust you will be exposed to and always wear an approved respirator.
Model G0464/G0465/G0467/G0468/G0470 Air Compressors |
