model G0464/G0465/G0467/G0468/G0470 (mfg. since 9/04) -15-
section 5: maintenance

schedule

For optimu m per formance from your
machine, follow this mainten ance sched-
ule and refer to any s pecific in structions
given in this section.

daily

1. Check the oil level! Use the sight glass
on the crankcase to make sure the oil
reservoir is at the correct level.
2. Check for worn or damaged cords and
plugs.
3. Check for any other condition that
could hamper the safe operation of this
air compressor.
4. When finished using the air compres-
sor, drain the condensation from the
tank as instructed in draining tank
on page 16, and leave the drain valve
open until the next use.
the air compressor will turn ON
automatically when it is set on auto.
When performing maintenance make
sure th e auto /off lever is in the
off position , the compressor is
unplugged, and the ai r pressure has
been bled out of the tank.
operating this equipment has the
potential t o cause eye injur y and
hearing loss. always wear eye and
ear protection when operating an air
compressor. be certain the safety
protection you we ar meet th e appro-
priate s tandards of th e ame rican
national standards in stitute (ansi) .
If the compressor is used on a daily basis,
perform the following ch ecks each week.

Weekly

1. Blow dirt and dust off of the air filter
(figure 9), then re-install.
2. Check for loose bolts or fittings.
3. Clean off all dirt and dust from the cylin-
der head, motor, fan, air lines, exhaust
pipe, couplers and frame. Dirt can lead
to overheating.
4. Check air lines and connectors to make
sure they are in good condition.
5. Pull the safety drain valve to make sure
it is working properly (see draining
tank on page 16).
figure 9. Air filter foam element.