Safety Instructions for Machinery
7.ONLY ALLOW TRAINED AND PROP- ERLY SUPERVISED PERSONNEL TO OPERATE MACHINERY. Make sure operation instructions are safe and clearly understood.
8.KEEP CHILDREN/VISITORS AWAY.
Keep all children and visitors away from machinery. When machine is not in use, disconnect it from power, lock it out, or disable the switch to make it difficult for unauthorized people to start the machine.
9.UNATTENDED OPERATION. Leaving machine unattended while its running greatly increases the risk of an accident or property damage. Turn machine Off and allow all moving parts to come to a com- plete stop before walking away.
10.DO NOT USE IN DANGEROUS ENVIRONMENTS. DO NOT use machin- ery in damp, wet locations, or where any flammable or noxious fumes may exist.
11.KEEP WORK AREA CLEAN AND WELL LIGHTED. Clutter and dark shadows may cause accidents.
12.USE A GROUNDED POWER SUPPLY RATED FOR THE MACHINE AMPERAGE.
Grounded cords minimize shock hazards. Operating machine on an incorrect size of circuit increases risk of fire.
13.ALWAYS DISCONNECT FROM POWER SOURCE BEFORE SERVICING MACHINERY. Make sure switch is in OFF position before reconnecting.
14.MAINTAIN MACHINERY WITH CARE.
Keep blades sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.
15.MAKE SURE GUARDS ARE IN PLACE AND WORK CORRECTLY BEFORE USING MACHINERY.
16.REMOVE CHUCK KEYS OR ADJUSTING TOOLS. Make a habit of never leaving chuck keys or other adjustment tools in/on the
17.DAMAGED MACHINERY. Check for bind- ing or misaligned parts, broken parts, loose bolts, other conditions that may impair machine operation. Always repair or replace damaged parts before operation.
18.DO NOT FORCE MACHINERY. Work at the speed for which the machine or acces- sory was designed.
19.SECURE WORKPIECE. Use clamps or a vise to hold the workpiece when practi- cal. A secured workpiece protects your hands and frees both hands to operate the machine.
20.DO NOT OVERREACH. Maintain stability and balance at all times when operating machine.
21.MANY MACHINES CAN EJECT WORKPIECES TOWARD OPERATOR.
Know and avoid conditions that cause the workpiece to "kickback."
22.STABLE MACHINE. Machines that move during operations greatly increase the risk of injury and loss of control. Verify machines are stable/secure and mobile bases (if used) are locked before starting.
23.CERTAIN DUST MAY BE HAzARDOUS to the respiratory systems of people and animals, especially fine dust. Be aware of the type of dust you are exposed to and always wear a respirator designed to filter that type of dust.
24.EXPERIENCING DIFFICULTIES. If at any time you are experiencing difficulties performing the intended operation, stop using the machine! Contact our Technical Support Department at (570)
G0484 Gear Head Mill/Drill |
