MACHINE DATA
SHEET
Customer Service #: (570)
MODEL G0563 OSCILLATING EDGE SANDER 2 HP
Product Dimensions: |
|
Weight | 396 lbs. |
Length/Width/Height | |
Foot Print (Length/Width) | |
Shipping Dimensions: |
|
Type | Not Available |
Content | Not Available |
Weight | N/A |
Length/Width/Height | N/A x N/A x N/A |
Electrical: |
|
Switch | Magnetic Contactor and Overload Relay |
Switch Voltage | 220V |
Cord Length | 10 ft. |
Cord Gauge | 14 gauge |
Minimum Circuit Size | 15 amp |
Plug Included | No |
Motors: |
|
Main |
|
Type | TEFC Capacitor Start Induction |
Horsepower | 2 HP |
Voltage | 220V |
Prewired | 220V |
Phase | Single |
Amps | 12A |
Speed | 1725 RPM |
Cycle | 60 Hz |
Number Of Speeds | 1 |
Power Transfer | Direct Drive |
Bearings | Shielded and Permanently Lubricated |
Main Specifications: |
|
Operation Information |
|
Sanding Belt Speed | 3150 FPM |
Sanding Belt Oscillations | 3/4 in. |
Sanding Belt Length | 89 in. |
Sanding Belt Width | 6 in. |
Sanding Belt Tilt | 0 - 90 deg. |
Model G0563 | The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications. | PAGE 1 OF 2 |
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. |
