Auxiliary Table |
| Dust Hood |
|
|
|
|
|
|
Slide the auxiliary table into place as pictured in Figure 14. Tighten the two thumb screws when table is at desired working height. It is not nec- essary to have the auxiliary table mounted at all times and can be installed only when needed.
Figure 14. Installing the auxiliary table.
Bolt the dust hood on using the hex bolts already threaded in place. See Figure 15.
Figure 15. Dust hood mounted in place.
Operating this equipment has the potential for respiratory damage to occur due to the level of airborne dust it produces. Always use a dust collection system AND wear a dust mask or respirator to avoid breathing wood dust. Serious personal injury may occur.
|
|
|
|
|
|
|
|
|
|
|
|
G1140 Edge Sander | |||
