9.Position the tool rest approximately 1⁄4" away from the workpiece and approximately 1⁄8" above the center line, as shown in Figure 37.

���������

��������� ����

����

�����������

���������

Figure 37. Tool rest position.

10.Test the setup by hand-turning the workpiece to make sure there is enough clearance all the way around before starting.

Spindle Turning Tips:

•When turning the lathe ON, stand to the side of the spinning direction until the lathe reach- es full speed and you can verify that the lathe will not throw the workpiece.

•Use the slowest spindle speed when rough cutting.

•Select the right speed for the size of workpiece you are turning. Use slower speeds for large workpieces (4" diameter and over); use the middle range speeds for medium sized workpieces (2" to 4" diameter); and use faster speeds for small sized workpieces (under 2" in diameter).

•Make sure the turning tool is against the tool rest the ENTIRE time that the turning tool is in contact with the workpiece.

•Learn the correct techniques for each tool you will use. If you are unsure, read books or magazines about lathe techniques and seek training from experienced users.

-26-

•Turn the lathe OFF immediately if the workpiece vibrates excessively. Check to make sure the workpiece is centered and balanced. Remove the workpiece and trim excess waste off corners with a bandsaw or table saw to reduce vibration. Make sure the workpiece is securely attached in the setup.

Faceplate Turning

Faceplate turning (Figure 38) is when a workpiece is mounted to the faceplate, which is mounted to the headstock spindle. This type of turning is usu- ally done with open-faced workpieces like bowls.

If screws cannot be placed in the workpiece, then a backing block can be glued to the workpiece and attached to the faceplate with screws.

Figure 38. Typical faceplate turning operation.

To mount your workpiece to the faceplate:

1.Find the center of your workpiece in the same manner as when spindle turning.

2.Cut off the corners of the workpiece.

3.Center the faceplate on the workpiece and attach it through the faceplate holes with non-tapered head wood screws as shown in Figure 39.

4.Thread the faceplate onto the headstock spindle and tighten securely.

G0657/G0658 Benchtop Lathe

Page 27 Page 29
Page 28
Image 28
Grizzly G0657/G0658 owner manual Faceplate Turning, To mount your workpiece to the faceplate
Page 27 Page 29

G0657/G0658 specifications

The Grizzly G0657 and G0658 models are highly regarded in the woodworking community for their robust design and innovative features. These band saws provide woodworkers with the precision and performance required for a variety of cutting tasks.

One of the main features of the Grizzly G0657 is its 10-inch resaw capacity. This allows users to slice through thick materials with ease, making it an excellent choice for those who work with larger lumber or who need to resaw thick boards into thinner slabs. The G0658, on the other hand, offers an impressive 14-inch resaw capacity, ideal for larger projects requiring deep cuts.

Both models are equipped with a powerful 2 HP motor, which provides ample power to tackle tough cuts without bogging down, ensuring a smooth and efficient operation. The induction motor is designed to provide consistent power, crucial for achieving accurate and clean cuts. Additionally, the variable speed control on these saws allows users to adjust the speed according to the material they're cutting, adding to their versatility.

The construction of the G0657 and G0658 is another highlight. Built with a heavy-duty steel frame, both models exhibit exceptional stability and durability, reducing vibrations during operation. This stability enhances cutting accuracy, which is particularly beneficial when dealing with detailed or delicate woodworking projects.

Another significant characteristic of these band saws is their easy-to-adjust blade guides. Featuring micro-adjustable upper and lower blade guides, users can fine-tune their settings with minimal effort, ensuring optimal blade performance and longevity. The easy-access tensioning and tracking controls also simplify blade adjustments, allowing users to focus more on their projects and less on setup.

Safety features are integral to both the G0657 and G0658. They include a blade break and a clear blade guard for added visibility during operations. The built-in dust collection port helps maintain a cleaner workshop environment by minimizing debris, allowing for safer and more efficient work conditions.

In conclusion, the Grizzly G0657 and G0658 band saws combine power, precision, and user-friendly features, making them an excellent investment for both amateur and professional woodworkers. With their robust construction, adjustable settings, and effective safety measures, these models stand out in the woodworking tools market. Whether you’re reshaping lumber or crafting intricate designs, these band saws are designed to meet a variety of woodworking needs with reliability and ease.
Top Page Image Contents