SECTION 4: ASSEMBLY

Beginning Assembly

 

Base

 

 

 

 

 

 

Assembly of the G1032 is straightforward. We have organized the assembly process into steps. Please follow them in sequence.

Caution: All die-cut metal parts have a sharp edge (called “flashing”) on them after they are formed. This is removed at the factory. Sometimes though, a bit of flashing might escape inspection. Please examine the edges of all die- cut metal parts before handling them.

Tools Required: 10/12mm open end wrench, regular and Phillips head screwdriver.

Position the base plate upside down and locate the casters so they are within easy reach. Mount the casters to the base plate using sixteen 10 - 24 x 12" Phillips Head Screws provided. Figure 2.

Figure 2.

 

 

 

 

 

 

 

 

-8-

 

 

G1032 Dust Collector

 

 

Page 10
Image 10
Grizzly G1032 instruction manual Beginning Assembly Base