MiTAC 8355 service manual Remove the LCD assembly

8355 N/B MAINTENANCE

8.Carefully put the notebook upside down,remove two screws of the hinges,Now you can separate the LCD assembly from the base unit. (Figure 2-21)

Figure 2-21 Remove the LCD assembly

Reassembly

1.Attach the LCD assembly to the base unit and secure with four screws of the hinges.

2.Reconnect the LCD wires to the system board..

3.Fit two hinge covers and secure with two screws.

4.Replace the battery pack and the keyboard. (See section 2.2.1 and 2.2.2 reassembly) .

83