8355 N/B MAINTENANCE

2.2.5 CD/DVD-ROM Drive

Disassembly

1.Carefully put the notebook upside down. Remove the battery pack. (Refer to section 2.2.1 Disassembly)

2.Remove three screws fastening the CD/DVD-ROM drive. (Figure 2-15)

3.Insert a small rod, such as a straightened paper clip, into CD/DVD-ROM drive’s manual eject hole (￿) and push firmly to release the tray. Then gently pull out the CD/DVD-ROM drive by holding the tray that pops out(￿). (Figure 2-15)

￿

￿

Figure 2-15 Remove the CD/DVD -ROM drive

Reassembly

1.Push the CD/DVD-ROM drive into the compartment and secure with three screws.

2.Replace the battery pack. (Refer to section 2.2.1 reassembly)

79

Page 80
Image 80
MiTAC 8355 service manual 5 CD/DVD-ROM Drive, Remove the CD/DVD -ROM drive