MiTAC 8355 service manual Inverter Board, Unscrew four screws

8355 N/B MAINTENANCE

2.2.8 Inverter Board

Disassembly

1.Carefully put the notebook upside down. And remove the battery pack and the keyboard. (See sections 2.2.1and 2.2.2 disassembly)

2.Remove the LCD Assembly. (See section 2.2.7 Disassembly)

3.Remove the four rubber pads and four screws. (figure 2-22)

4.Insert a flat screwdriver to the lower part of the top cover and gently pry the frame out. Repeat the process until the cover is completely separated from the housing.

5.Disconnect one wire from inverter board and remove two screws fastening the inverter board. (Figure 2-23)

Figure 2-22 Unscrew four screws Figure 2-23 Disconnect one cable

84