Grizzly instruction manual Operations, G1066Z Control Panel

SECTION 6: OPERATIONS

Keep loose clothing out of the way of machinery and keep hair pulled back.

Disconnect power to the machine when perform- ing any adjustments or maintenance. Failure to do this may result in seri- ous personal injury.

Wear safety glasses dur- ing all operations on the planer. Failure to comply may result in serious personal injury.

Always wear a dust mask when operating the

sander. Using this machine produces saw- dust which may cause allergic reactions or res- piratory problems.

NOTICE

The following section was designed to give instructions on the basic operations of this drum sander. However, it is in no way com- prehensive of every drum sander applica- tion. WE STRONGLY RECOMMEND that you read books, trade magazines, or get formal training to maximize the potential of your drum sander.

-22-

G1066Z Control Panel

Before plugging in the Model G1066Z familiarize yourself with the control panel.

The Model G1066Z control panel features a main power switch, separate on/off controls for the variable speed conveyor and the sanding drums, a variable speed adjustment dial and an amp load meter. Figure 17 points out each of these con- trols.

Sanding Drum	Conveyor ON	Feed Rate
Motor ON
		Load Meter
Sanding Drum	Conveyor OFF
Motor OFF	Main Power

Figure 17. G1066Z control panel.

The main power switch features an important safety device that is very important to remember. A twist-and-pull design in the knob helps to avoid accidental starts; yet, in the event of an emer- gency, the knob can be pushed straight down to stop the machine.

Another important point to remember about the control panel is that the feed conveyor motor and the drum motor operate independently from each other.

The load meter and the variable speed dial are very important to the operation of the Model G1066Z. Please read the “Load Meter” and the “Variable Speed” instructions in this section before sanding any stock.

G1066/G1066Z/G1079 Drum Sander