-10- Model g1095/g1096 1-hp power Feeder
additional Safety for Power Feeders
5. WORKPiEcE SuPPORt. do not feed
long workpieces without providing adequate
support at the outfeed end of the t able.
6. StOPPiNG FEEDER. Always stop the
feeder before stopping the cutting tool.
7. aDJuStMENtS. disconnect the feeder
from its power source before cleaning,
repairing, or making adjustments.
8. EXPERiENciNG DiFFicuLtiES. if at any
time you are experiencing difficulties per-
forming the intended operation, stop using
the machine! Contact tech support at
(570) 546-9663.
1. SaFEty accESSORiES. Always use
appropriate machine guards.
2. tOOL SPEED. Make sure all cutting tools
are rotating at the operating speed before
feeding the workpiece.
3. FEEDiNG SPEED. do not overload the
cutting tool by feeding too quickly. the
cutting tool will perform bet ter and be
safer working at the rate for which it was
designed.
4. HaND SaFEty. Keep hands away from
rotating parts on the feeder and the cut-
ting tool. do not allow hands or clothing
to be pinched beween the rollers and
workpiece.
No list of safety guidelines can be complete.
Every shop environment is different. always
consider safety first, as it applies to your
individual working conditions. use this and
other machinery with caution and respect.
Failure to do so could result in serious per-
sonal injury, damage to equipment, or poor
work results.
Like all machines there is danger associated
with this machine. accidents are frequently
caused by lack of familiarity or failure to pay
attention. use this machine with respect
and caution to lessen the possibility of
operator injury. if normal safety precautions
are overlooked or ignored, serious personal
injury may occur.