Fence | Dust Port | |
|
|
|
|
|
|
To mount the fence:
1.Loosen the lock knob and slide the fence onto the rail.
2.Slide the fence beyond the center of the table so the blade can be installed without blocking the fence as shown in Figure 5.
Figure 5. Fence mounted on rail.
3.Slip the blade through the slot in the table and onto the bandsaw wheels, similar to how the blade was installed before you removed it. Make sure the blade teeth face downward during installation.
4.Tension the blade enough to keep it on the saw so it does not spring off during the rest of the assembly process.
To install the dust port:
1.Place the dust port on the saw and install it with the included Phillips head screws as shown in Figure 6.
Figure 6. Dust port installed.
|
|
|
|
|
|
|
|
|
| 24" & 27" Resaw Bandsaws | |
|
|