MODEL G5786 |
5" AIR ANGLE |
GRINDER |
INSTRUCTION SHEET |
EYE/EAR INJURY HAZARD! Wear safety glasses and hearing protection during use of this tool!
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected 
operation during service!
EXPLOSION HAZARD!
Never exceed 120 PSI! Always use accessories with correct speed rating.
RESPIRATORY HAZARD! Grinding produces fine dust. Wear the appropriate protection during use!
Figure 1. Model G5786.
Angle Grinder MUST have 3-4 drops of oil directly dropped into the air fitting before each use as shown in Figure 2.
Introduction
This 11,000 RPM Angle Grinder features a large paddle switch with safety mechanism and side handle for super control. G5786 has 7⁄8" arbor. Includes two wrenches. Weighs 5 lbs.
Inventory |
| |
A. 5" Air Angle Grinder | 1 | |
B. | Handle | 1 |
C. | Flat Wrench | 1 |
D. | Pin Wrench | 1 |
Figure 3. Lubricating directly into air fitting.
If you need help with your new pneumatic tool, call our Tech Support at: (570)
Operation
Tool requires 90 PSI and 1⁄4" NPT air fitting to operate correctly.
Make sure grinding wheel is backed by flange and tightened securely with the flange nut.
Grinding Wheels |
|
|
|
| |||
Model H4790 | 5 | x 1⁄8" | |||||
Model H4791 | 5 | x 1⁄4" | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COPYRIGHT © FEBRUARY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8032 PRINTED IN TAIWAN
