5 Press the open/close button (0CD1, 0 CD2, or
0CD3) for the CDs already played to replace the CDs.
• You can change CDs to continue the First Track Recording using more than 3 CDs.
When the first track of the last loaded CD is recorded, First Track Recording stops.
To stop recording, press 7. “WRITING” flashes for a while.
Both the CD player and the MD recorder stop.
During First Track Recording
Repeat play mode will be canceled automatically.
Recording the External Equipment — Sound Synchronized Recording
With this recording method, you can start recording automatically when the source sound comes into this unit through the LINE 1 jacks, LINE 2 jack, or the DIGITAL IN terminal. Sound Synchronized Recording will stop automatically if no sound comes in for more than 30 seconds.
When the sound signal comes in through the DIGITAL IN terminal, digital recording is performed.
1 Insert a recordable MD into the MD loading slot.
2 Press LINE repeatedly to select the external equipment you want to record from.
•When selecting the equipment connected either the LINE 1 jacks or LINE 2 jack, the sound input level appears for a while. (See page 63 for the sound input level.)
3 Press LONG MODE on the unit if necessary.
The recording length mode changes as follows:
SP 
LP2
(Standard Play) (2 Times Long Play)
LP4
(4 Times Long Play)
•For the recording length mode, see “Stereo Long- Hour Recording (MDLP)” on page 33.
4 Select Sound Synchronized Recording.
1)Press REC MODE.
2)Press SET.
The REC PAUSE lamp on the unit starts flashing.
Ex. When “LINE 1” is selected as a playback source (with “Penguin” is selected as the
animation character)
5 Start playback on the external equipment.
The REC PAUSE lamp stops flashing and remains lit, and recording starts automatically.
To stop recording, press 7. “WRITING” flashes for a while.
When the source for recording is the equipment connected to either the LINE 1 jacks or the LINE 2 jack
You can select the sound input level. See “Selecting the sound input level” on page 63.
When recording is stopped or finished
Sound Synchronized Recording is canceled automatically.
If Sound Synchronized Recording do not work correctly
Use the Standard Recording method (see page 34).
Sound Synchronized Recording starts automatically when this unit detects sound signals coming in. This means that, if sound signal is too weak for this unit to detect, Sound Synchronized Recording will not start (or will stop even while the source is being played).
When recording from a DAT deck using Sound
Synchronized Recording
Two track marks may be recorded at the beginning of the recording. If this occurs, join these two track marks using the JOIN function described on page 42.
