3 Push the joy control downward ( ) — or upward ( ) — to select the input level
•When the source is the equipment connected to the LINE 1 jacks:
Level 1 : Select when the recorded sound is not loud enough. This setting increases the input signal level. (Initial setting when shipped from the factory)
Level 2: Select when the recorded sound is distorted. This setting reduces the input signal level.
•When the source is the equipment connected to the LINE 2 jack:
Level 1 : Initial setting when shipped from the factory
Level 2: Select when the recorded sound is distorted with “Level 1” selected.
Level 3: Select when the recorded sound is still distorted with “Level 2” selected.
Level 4: Select when the recorded sound is still distorted with “Level 3” selected.
•If “Level OVER!” still appears even after setting the input level to “Level 4,” reconnect the equipment to the LINE 1 jacks, and set the input level to “Level 2.”
4 Press SET to finish the setting.
Changing the source name
You can change the external source names (LINE1, LINE2, and DIGITAL IN) to the actual component names.
•You cannot change the external source names while recording its sound on an MD.
1 Press MENU.
The menu screen appears in the main display.
•If the current source is not the external equipment connected, you cannot go to the next step.
2 Push the joy control downward ( ) to select “NAME CHANGE,” then press SET.
Ex. When the source is the external equipment
connected to the LINE 1 jacks
3 Push the joy control downward ( ) — or upward ( ) — to select the source name.
•When the source is the external equipment connected to the LINE 1 jacks:
You can select from “LINE1” (Initial setting), “TAPE,” “DBS,” “VCR,” “TV,” and “GAME.”
•When the source is the equipment connected to the LINE 2 jack:
You can select from “LINE2” (Initial setting) and
•When the source is the equipment connected to the DIGITAL IN terminal:
You can select from “DIGITAL IN” (Initial setting) and
4 Press SET to finish the setting.
Auto Power Off Setting
Auto Power Off function automatically turns off the unit if no sound comes in for more than 3 minutes.
If any operation is done during this
1 Press MENU.
The menu screen appears in the main display.
•If the unit is turned off, you cannot go to the next step.
2 Push the joy control downward ( ) to select “A.P.off (current setting*).”
* The current setting will appear following “A.P.off.”
3 Push the joy control rightward ( ) or leftward ( ) to select either “SET” or “CANCEL.”
SET : Activates the Auto Power Off function.
CANCEL : Cancels the Auto Power Off function.
4 Press SET to finish the setting.
When Auto Power Off function is activated, the A.P.off indicator lights on the display.
The A.P.off indicator starts flashing if no sound comes in.
When the remaining time until the