DIVIDE Function
This function allows you to divide one track into two separate tracks. It is useful, for example, when you want to add track marks at a certain point within a track or if you want to separate a recording.
•To stop any time during editing process, press TITLE/ EDIT.
1 Insert an MD you want to edit into the MD loading slot.
•It takes about 5 seconds for the unit to read the TOC (Table Of Contents) of the inserted MD. While the unit is reading it, you cannot go to the next step.
2 Press TITLE/EDIT.
The source is changed to “MD.”
•If “DIVIDE” is not shown, you cannot divide the track.
3 Push the joy control downward ( 
) to select “DIVIDE” (highlighted), then press SET.
The first track (or the current track) starts playing.
4 Push the joy control rightward ( 
) or leftward ( 
) to select the track you want to divide.
The selected track starts playing.
Ex. When you want to divide track 5
5 Press SET when you find the point where you want to divide the track.
The MD recorder repeats the selected point
— a
•If the dividing point is satisfactory, go to step 7.
•If the dividing point is not satisfactory, go to the next step.
6 Push and hold the joy control rightward ( ) or leftward ( ) to precisely adjust the dividing point.
•You can shift the dividing point up to ±128. This range (±128) corresponds to approximately ±8 seconds* from the original point (Position 0).
Ex. When adjusting the point by +20
*When “SP” is selected for the recording length mode. For “LP2,” it is approximately ±16 seconds, and for “LP4” approximately ±32 seconds.
When you stop holding the joy control, the unit repeats the newly selected dividing point.
•When you find the right position, go to the next step.
•If you want to cancel the dividing point, press CANCEL, then select the correct dividing point.
7 Press SET. |
If the track has a title, it is shown here. |
|
| 8 Press ENTER/DEMO to finish the editing | |||
|
|
|
| |||
• If you do not push the joy control rightward (¢ ) |
|
| procedure. | |||
|
| “EDITING” appears for a while, then “WRITING” | ||||
or leftward (4 ), the same track plays repeatedly. |
|
| ||||
|
| flashes while the editing you have made is being | ||||
• You can push and hold the joy control upward (` |
|
| ||||
|
| recorded on the MD. | ||||
) or downward (1 | ) to find the dividing point. |
|
| |||
|
|
| ||||
To join the divided tracks again, see the JOIN function.
