Loading CDs
On the unit ONLY:
1 Press one of the open/close buttons (0 CD1, 0CD2, or 0CD3) for the disc tray you want to load a CD onto.
Playing Back the Entire Discs — Continuous Play
You can play CDs continuously.
1 Load CDs.
The unit automatically turns on and the selected disc tray comes out.
2 Place a CD correctly on the circle of the disc tray, with its label side up.
Good |
|
|
No good |
•When using a CD single (8 cm), place it on the inner circle of the disc tray.
3 Press the same open/close button (0CD1, 0CD2, or 0CD3) you have pressed in step 1.
The disc tray closes.
4 Repeat steps 1 to 3 to place other CDs.
When loading more than one CD continuously
Press the open/close button (0CD1, 0CD2, or 0CD3) for the next tray you want to place a CD onto. The first disc tray automatically closes and the next disc tray comes out.
2 Select a disc number you want to start play with. On the remote control:
Press one of the disc number buttons (CD1, CD2 and CD3).
On the unit:
Press DISC repeatedly to select the disc number you want, then press CD #/ 8.
CD playback starts from the first track of the selected disc.
This shows the currently selected disc.
|
| Track |
|
|
| No. | Elapsed playing time | |
|
| |||||||
|
|
| ||||||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•Pressing CD 3 / 8without selecting a disc number starts playing back the currently selected CD.
To stop during play, press 7.
To remove the disc, press the corresponding open/close buttons (0CD1, 0CD2, or 0CD3).
CD playback sequence
When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.
•When CD 1 is the starting disc : CD 1 ] CD 2 ]CD 3 (then stops)
•When CD 2 is the starting disc : CD 2 ] CD 3 ]CD 1 (then stops)
•When CD 3 is the starting disc : CD 3 ] CD 1 ]CD 2 (then
stops)
*If no CD is on the disc trays, CD player skips such an empty tray.
About the CD indicators
Each disc number indicator ( ) corresponds to the disc tray of the same number.
Lights when a disc on the corresponding disc tray is currently selected.
Goes off when the unit has recognized that there is no CD on the corresponding disc tray.
Flashes during play or pause.
Lights when the CD player is selected as the source.