5 Press SET.
“ ” appears between track number and track title.
“ ” means the track in the same line will be erased when you finish the editing procedure.
Ex. When you want to erase track 3
•If you have selected a wrong track number, press CANCEL, then select the correct track number.
6 Repeat step 4 and 5 to select all the tracks you want to erase.
• You can select up to 15 tracks.
7 Press ENTER/DEMO to finish selecting tracks.
8 Press ENTER/DEMO again to finish the editing procedure.
“EDITING” appears for a while, then “WRITING” flashes while the editing you have made is being recorded on the MD.
ALL ERASE Function
This function allows you to erase all the tracks on an MD.
•To stop any time during editing process, press TITLE/ EDIT.
1 Insert an MD you want to edit into the MD loading slot.
•It takes about 5 seconds for the unit to read the TOC (Table Of Contents) of the inserted MD. While the unit is reading it, you cannot go to the next step.
2 Press TITLE/EDIT.
The source is changed to “MD.”
3 Push the joy control downward ( ) to select “ALL ERASE” (highlighted), then press SET.
4 Press ENTER/DEMO to finish the editing procedure.
“EDITING” appears for a while, then “WRITING” flashes while the editing you have made is being recorded on the MD.