Continued
Assigning Titles to an MD
You can assign a name to each MD and to each track using alphabetic characters (uppercase and lowercase), symbols and numerals. Once a title is assigned, it is displayed for your confirmation.
•You cannot edit titles composed of more than 61 characters.
About the number of characters inputted for an MD
The total number of characters that can be input for an MD is 1792, and the maximum number that can be input for each track is 61. (However, the actual number you can input may be slightly less than this maximum numbers due to the MD limitations – see page 67.)
•A space can be counted as one character.
•When the stereo
33)method is used for recording, the maximum number you can input for a track title automatically reduced since "LP:" and four spaces are automatically added to the beginning of the track title. Consequently this reduces the total number of characters you can input for an MD.
Example: You can input up to 10 characters for each track if an MD is composed of 120 tracks recorded using the stereo
On the unit:
In the following example, the process is explained from the very first — that is, inserting a disc. If you have already started recording or playing, start from step 2.
•To exit from the title entry screen any time during the process, press TITLE/EDIT.
1Insert an MD you want to edit into the MD loading slot.
•It takes about 5 seconds for the unit to read the TOC (Table Of Contents) of the inserted MD. While the unit is reading it, you cannot go to the next step.
2Press TITLE/EDIT.
The source is changed to “MD.”
•If you press TITLE/EDIT while recording, track title entry screen of the current recording track appears in the main display = go to step 4.
3Press SET.
The MD recorder enters one of the following title entry screen.
• Disc title entry screen: appears when you press SET when the MD recorder stops.
•Track title entry screen: appears when you press SET while playing or pausing.
Ex. While playing track 1
4 Push the joy control rightward ( ) or leftward ( ) to change the title entry mode.
• Title entry mode changes as follows:
Disc |
|
| 1st track |
|
|
| 2nd track |
|
| ||
title |
| title |
|
|
| title |
|
| |||
Last track |
|
|
|
|
|
| 3rd track |
| |||
title |
|
|
|
|
|
| title |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
5 Press SET to enter the selected title entry mode.
Ex. When entering a disc title
6 Select the character set you want.
1) Push the joy control horizontally ( / ) and vertically ( / ) to select “ .”
2)Press SET.
•Each time you press the button, the character sets change as follows:
Alphabets | Numerals | |
& Symbols | ||
| ||
: Select this to change the | ||
character set. |
|