JVC CA-MXS6MD manual Title entry, Writing flashes while the editing you have

4	Press SET to enter the selected title entry mode.		9 Press MD TITLE (or ENTER again) to finish the
		Character entry position			title entry.
			10 Press 0(on the unit) for the MD recorder to eject
					the MD.
					“WRITING” flashes while the editing you have
					made is being recorded on the MD.
5	Press CHARACTER to select the character set you
	want.

•Each time you press the button, the character sets change as follows:

Capital letters Small letters

Numerals

6 Input a character.

Available Symbols are as follows:

(Blank)

1)Press the character entry button for a character you want to input.

Examples:

•To input an “A” or “a,” press ABC once. To input a “B” or “b,” press ABC twice.

To input a “C” or “c,” press ABC three times.

•To input a symbol, press MARK repeatedly until the mark you want appears.

•To input a numeral, press 0 – 9.

•To move the character entry position while entering a title, press ¿(10) or fl(+10).

•To enter a space while entering a title, press fl (+10) twice.

•If you have entered an incorrect character, press CANCEL to cancel the last entry.

2)Press the button for the next character you want to input.

•If the next character you want to input is assigned to the same button you have just pressed in step

6 –1), press fl(+10) first to move the character entry position to the right.

You can assign titles during play or recording

•During play: Entering a track title

The MD recorder repeats playback of the current track until you press ENTER in step 8 above. When you press ENTER, the next track will be played.

Entering a disc title

The MD recorder repeats playback of all tracks of the MD until you press ENTER in step 8 above. When you press ENTER, the MD recorder enters the track title entry mode.

•During recording: Entering a track title

The MD recorder continues recording even after you press ENTER in step 8 above. When you press ENTER, a track title is assigned to the track where you have started the title entry. If you do not press ENTER before recording ends, the track title assigned will be canceled.

•During CD Synchronized Recording (see page 35): You can assign the disc title, and 16 track titles one after another as recording goes on. The track titles you have entered are automatically assigned to the tracks recorded on the MD in sequential order. If you enter 17th track title or more, they are ignored.

7 Repeat steps 5 and 6 to enter other characters.

•The main display can only show 8 characters at a time. If you enter the 9th character, the first character disappears, and so on.

8 Press ENTER to finish the current title entry.

The unit enters title entry mode again.

• You can assign another title by repeating steps 3 to 8.

If “NO OPERATE!” appears

Operation you have tried to use is not acceptable. For example, you have tried to use the buttons on the unit while entering a title using the remote control. Use the remote control only.

– 49 –