3 Repeat steps 1 and 2 to store stations of the other 
band.
When you cannot store stations you want automatically
Stations with weak signals cannot be detected with this automatic presetting method. To store such a station, use the manual presetting method that follows.
To preset stations manually — Manual Presetting 1 Tune in the station you want to preset.
• See “Tuning in a Station” on page 18.
2 Press SET.
The preset number starts flashing.
3 Select a preset number.
On the remote control:
Press the number buttons.
Ex. For preset number 5, press 5.
For preset number 15, press +10, then 5. For preset number 20, press +10, then 10.
On the unit:
Push the joy control rightward ( 
) or leftward ( 
).
•Rightward (
): to increase the preset numbers.
•Leftward (
): to decrease the preset numbers.
4 Press SET again.
The tuned station in step 1 is stored in the preset number selected in step 3.
•Storing a new station on a used number erases the previously stored one.
When you unplug the AC power cord or if a power failure occurs
The preset stations will be erased in a few days. If this happens, preset the stations again.
Tuning in a Preset Station
1 Press FM/AM.
The unit automatically turns on and tunes in the previously tuned station (either FM or AM).
•Each time you press the button, the band alternates between FM and AM.
2 Select a preset number.
On the remote control:
Press the number buttons.
Ex. For preset number 5, press 5.
For preset number 15, press +10, then 5. For preset number 20, press +10, then 10.
On the unit:
Push the joy control rightward ( 
) or leftward ( 
).
•Rightward (
): to increase the preset numbers.
•Leftward (
): to decrease the preset numbers.
